Polyethylene chlorinated

Ụdị ngwaahịa

Ngwaahịa egosipụtara

Ca-Zn Stabilizer na-adịghị egbu egbu

Resin Polyethylene Chlorinated (usoro CPE)

Roba Polyethylene Chlorinated (usoro CM)

Polyethylene chlorosulfonated (CSM)

Ihe enyemaka nhazi acrylic (ACR) maka PVC

Acrylic Impact Modifier (AIM) maka PVC

Mgbanwe mmetụta ACM (ACM) maka PVC

Methyl methacrylate-Butadiene-Styrene Mmetụta Mgbanwe maka PVC

Ngwakọta chlorinated polyvinyl chloride (CPVC).

Polyvinyl chloride chloride (CPVC) resin

Resin Polyethylene Chlorinated (usoro CPE)

Chlorinated Polyethylene bụ a elu molekul polymer ihe mere si HDPE site chlorination.The pụrụ iche molekụla Ọdịdị na-enye CPE ọtụtụ elu anụ ahụ na chemical arụmọrụ na-eme ka CPE nwere ike ọtụtụ-eji na PVC, engineering plastics (CPE resin series ) na Rubber ngwa (CM Rubber series).

Dị ka otu n'ime ihe ndị kasị mkpa mmetụta modifier na eluigwe na ala plastics ahịa, CPE ọtụtụ-eji na nhazi nke PVC extrusion na injection ịkpụzi ngwaahịa, gụnyere isiike PVC profaịlụ, ọkpọkọ, ọkpọkọ oyiyi akwa, Ibé akwụkwọ na ogwe. Ọ nwere ike ịkwalite ike mmetụta nke ngwaahịa PVC siri ike ma na-enye ngwaahịa ndị ahụ ọrụ dị oke ala dị ala, nguzogide ihu igwe dị mma. Ụfọdụ ndị ahịa na-ejikwa ya maka imepụta ngwaahịa plastik PE ma ọ bụ PP nwere ego kwesịrị ekwesị.

Kpọtụrụ anyị

nkọwa ngwaahịa

Okwu Mmalite ngwaahịa

E jiri ya tụnyere ndị ọzọ na-eme mgbanwe mmetụta dị ka AIM (Acrylic Impact Modifier), MBS na ABS, CPE na-asọmpi na arụmọrụ ya na ọnụahịa ya.

Ọtụtụ ndị ahịa na-akwado CPE ma ọ na-agbasawanye na oke oke nke ahịa mgbanwe mmetụta.

CPE dabara adaba maka nnọchi nke Acrylic mmetụta modifier (AIM) ma ọ bụ ịgwakọta na Acrylic mmetụta modifier (AIM) na ụfọdụ pasent na-enweghị mmezi data nhazi na nhazi, na-arụpụta kasị mma arụmọrụ na-eri-irè ngwọta.

Ngwa ngwaahịa

Ihe	Nkeji	CPE135A	CPE3135	CPE645	CPE2035	CPE3100	CPE3200	CPE3080
Ọdịnaya chlorine	%	35± 1.0	35± 1.0	25±1	35± 1.0	40±1	40±1	30±1
Okpomọkụ nke ngwakọta	J/g	≤2.0	≤2.0	≤2.0	-	-	-	1.5
Ọdịnaya na-agbanwe agbanwe	%	≤0.3	≤0.3	≤0.3	≤0.3	≤0.3	≤0.3	≤0.3
Shore A ike	(A)	≤60	≤60	≤78	≤65	≤65	≤65	≤65
Ike ọdụdọ	MPa	≥8.0	≥8.0	≥8.0	≥8.0	≥8.0	≥8.0	≥8.0
Ogologo oge	%	≥700	≥700	≥600	≥700	≥700	≥1000	≥700
Njirimara		Arọ molekụla dị elu, ike mmetụta kacha mma na ọ na-asọ n'efu, ike siri ike, Ejiri ya dị ka mgbanwe mgbanwe na nnukwu extrusion nke ngwaahịa PVC.	Ibu molekụla dị elu, ịrụ ọrụ igwe dị elu, mgbanwe mgbanwe izugbe maka ngwaahịa rọba siri ike na ngwaahịa na-agbanwe agbanwe	Ibu molekụla dị elu, ọdịnaya chlorine kachasị dị ala, modul dị elu, ngwakọta ngwa ngwa, nhazi dị elu, gloss dị elu, dabara adaba na ngwakọta na ndị na-agbanwe mmetụta mmetụta acrylic, iji nweta ngwakọta a na-achọsi ike nke mmetụta ductile na arụmọrụ nhazi.	Ọdịnaya chlorine dị ala, ịdị arọ molekụla dị ala, kristal dabara adaba, ndakọrịta dị mma na ABS, akụrụngwa rheological kacha mma, nkwụsi ike kacha elu, nhọrọ kacha mma dị ka mgbanwe mgbanwe nke FR-ABS.	Ọdịnaya chlorine dị elu, nghọta kacha mma na ezigbo ndakọrịta na PVC; mma flowability, polarity na okpomọkụ iguzogide	Ọdịnaya chlorine dị elu, nghọta kachasị mma, ịdị arọ dị elu na arụ ọrụ igwe dị elu; Nguzogide okpomọkụ dị mma, polarity na ezigbo ndakọrịta na PVC.	Ihe dị arọ molekụla kachasị elu, ọdịnaya chlorine dị ala, modul dị elu, arụmọrụ dị mma nke ọma, nnabata dị elu, gelation dị mma, nhazi dị mma, nnukwu gloss na ọmarịcha elu maka ngwaahịa njedebe.
Ngwa		PVC ọnụ ụzọ na windo profaịlụ, siding, mpempe akwụkwọ, nsu, PVC ọkpọkọ, eletriki conduit wdg.	PVC extrusion na injection ịkpụzi ngwaahịa: PVC ụzọ na window profaịlụ, siding, mpempe akwụkwọ, nsu, PVC ọkpọkọ, eletriki conduit wdg.	Maka akwa PVC siding, ọkpọkọ, profaịlụ windo ma ọ bụ profaịlụ ngere. Nwere ike dochie AIM ma ọ bụ gwakọta ya na AIM	ABS ngwaahịa ire ọkụ retardant na mmetụta mgbanwe, PE, PP ire ọkụ retardant, ụfụfụ ngwaahịa	Enwere ike iji ya mee ihe mgbanwe nke isiike ngwaahịa PVC translucent na ire ere	Enwere ike iji ya mee ihe mgbanwe nke nro PVC translucent ngwaahịa, adhesives, ngwaahịa ụfụfụ na ọkụ retardants	Dochie MBS dị ka mmetụta mgbanwe maka ngwaahịa PVC translucent

Maka ozi ndị ọzọ na akara ule ndị ọzọ, biko kpọtụrụ info@fine-additive.com

Maka ụdị Omuma sitere na usoro Dow -Tyrin na ndị ọzọ, FINE aslo nwere ihe nhata zuru oke.

Uru ngwaahịa

◆ Nweta ike mmetụta nke ngwaahịa PVC siri ike

◆ Ezi Usoro-ikike & ikike njuputa dị elu

◆ Magburu onwe ihu igwe na-eguzogide & ezigbo ọgwụ mgbochi

◆ Mgbanwe dị elu na ike mmetụta dị ala dị ala

◆ Dị ịrịba ama dakọtara na acrylic mmetụta modifier

◆ Elu ndakọrịta na polymers dị ka PVC, PE na ABS

◆ Ike nkuku mara mma

Ngwa ngwaahịa

◆ Mgbanwe mmetụta dị mma maka ngwaahịa PVC siri ike na nke na-agbanwe agbanwe

FINE CPE nwere ike ọ bụghị naanị ịkwalite arụmọrụ mgbanwe mmetụta, ọkachasị arụmọrụ dị ala, ike ihu igwe maka ngwaahịa PVC dị nro mana ọ na-enyekwa ike ịgbado ọkụ nke ngwaahịa ikpeazụ ma kwalite ngwa ngwa plasticization nke PVC.

◆ A na-eji ngwaahịa PVC dị nro

Ọdịdị molekụla pụrụ iche na-eme FINE CPE usoro nwere ike iji ozugbo maka ngwaahịa PVC dị nro dị ka elastomer ma nye ngwaahịa ndị dị mma ikike ihu igwe dị elu na ndụ ọrụ ka mma.

◆ Ọkụ na-egbochi ABS ngwa

Site na nkwụghachi ọkụ ya dị oke mma na mmiri mmiri, FINE CPE nwere ike dochie ụfọdụ plasticizers dị ka plastik na-adịgide adịgide maka ụfọdụ ngwaahịa PVC, ọ gaghịkwa akwaga na volatilized ọbụlagodi na nhazi dị elu ma ọ bụ okpomọkụ ọrụ.

Mgbakwunye nke ụfọdụ pasent nke FINE CPE n'ime ọkụ retardant ABS nhazi ga-ọ bụghị nanị na-ezere iji nke nnukwu ego nke inorganic ire retardants na nhazi, nke na-eme ka arụ ọrụ anụ ahụ efunahụ, kamakwa ga-arụ ọrụ dị mma n'ịkwalite ire ọkụ retardancy nke dum usoro na substantially kwalite mmetụta ike nke ọgwụgwụ ngwaahịa site ya High mmetụta mgbanwe arụmọrụ, elu efficiency.

PVC nsu
PVC ọkpọkọ
PVC profaịlụ
PVC siding