Chlorinated Polyvinyl Chloride

Products Categories

Chlorinated Polyethylene resin (CPE series)

Chlorinated Polyethylene Rubber (CM Series)

Chlorosulfonated polyethylene (CSM)

Acrylic processing aids (ACR) for PVC

Acrylic Impact Modifier（AIM） for PVC

ACM Impact Modifier (ACM) for PVC

Methyl methacrylate-Butadiene-Styrene Impact Modifier for PVC

Chlorinated Polyvinyl Chloride (CPVC) Compound

Chlorinated Polyvinyl Chloride (CPVC) Resin

High Chlorinated Polyethylene (HCPE resin)

010203

Chlorinated Polyvinyl Chloride (CPVC) Resin

CPVC is a thermoplastic engineering plastic produced by chlorination of polyvinyl chloride (PVC) resin. After the chlorination, it has even higher polar and good chemical stability, the vicat softening temperature is increased from 72-82℃ to more than 125℃.

So CPVC resin has more flexible application in production and it can withstand higher temperature when its comparing with PVC.

product details

PRODUCT INTRODUCTION

As a type of high heat and corrosion resistant material CPVE Resin has become an important engineering thermoplastic due to its relatively low cost, high heat distortion temperature, chemical resistance, outstanding mechanical property, dielectric property, flame and smoke resistance properties.

CPVC was first commercialized by Noveon in the early 1960s and has since proven its value in a variety of industrial applications in which a high use temperature and excellent resistance to chemical are desirable. It is widely used in production of fire safety pipe, hot and cold water pipe and chemical pipe & fittings, etc.

Used in hot and cold water delivery pipes and industrial liquid handling. Besides pipe and fittings, many other industrial fluid-handling product are available in CPVC, including pumps, valves , strainers, tower packing, and duct, as well as sheet for fabrication into tanks ,duct, and tank lining.

Product parameters

Item	Unit	CPVC-1000J	CPVC-700Z
Appearance	White powder	White powder	White powder
Bulk Density	g/cm3	0.5 - 0.7	0.5 - 0.7
Chlorine content	%	67.0 ± 0.2	66.8 ± 0.2
Volatile matter	%	≤0.3	≤0.3
Vicat softening temperature	℃	≥110	≥110
Sieve residue(30 mesh)	%	≤1.0	≤1.0
Application	-	Extrusion grade： extrude of all kinds of heat-resistant plastic products, such as hot-water tube used in shipping and life facilities, brine tube, chlorine gas tube, electric pipeline of chlorine-alkali factories etc	Injection grade： all kinds of heat-resistant plastic products, such as hot-water tube used in shipping and life facilities, brine tube, chlorine gas tube, and electric pipeline of chlorine-alkali factories

Product advantage

◆ Excellent processability and stability,

◆ Higher Vicat softening index

◆ Superior Electric Insulation Properties

◆ Good impact strength and Secondary Processing Properties

◆ Excellent Chemical Resistance and Corrosion Resistance

◆ Superior Heat Resistance

◆ Flammability